Rode is a well-known microphone manufacturer. Recently, they released the PSA1+, an inexpensive condenser mic with a boom arm for video and music recording in compact settings. I have been trying to find out how it compares to other microphones on the market that are similar in price point – so let’s take a look!
The “rode boom arm” is a shotgun mic that attaches to the end of your camera. The boom arms allow for more flexibility in shooting angles, and can be used on either side of the camera.
So you’ve invested in a nice new microphone for your desk, but you don’t want to use the meager base stand that came with it. A good boom arm is necessary for putting your microphone precisely where it needs to be. Rode’s PSA1 has been regarded as one of the finest on the market for years, but the firm has recently released an improved version that is even better than the original.
The Rode PSA1+ has the same smooth and quiet motion that sent the original to the top of the charts, as well as various tweaks to solve problems in the original design. Rode gave one of these boom arms to High Ground Gaming so that we could offer an honest and impartial assessment to our readers. Here’s what we discovered.
Specs (Zoom In)
- Spring with a parallelogram design
- 940mm (3’1″) horizontal reach
- 860mm (2’10”) vertical reach
- Rotation of 360 degrees
- Microphones weighing 94g (.2 lbs) to 1.2kg may be held in this case (2.6lbs)
- Clamp and insert for the desk
- Cable management that is integrated
- springs that have been fully dampened
- Arm cover made of neoprene
- Cost: $129.00
At first sight, the general design seems to be extremely similar to the PSA1. There are joints at the base, midway point, and where the microphone joins on the all-black metal arm. The inclusion of neoprene sleeves is one of the most noticeable alterations. These are applied to the PSA1arms +’s to provide extra sound attenuation. They also have multiple clips attached, which provide a clean and straightforward wire management solution.
The PSA1+ includes both a desk mount clamp and a threaded desk mount, which can be put into a hole drilled into the center of any flat surface to quickly connect the boom arm to the edge of a desk or table. It’s worth noting that the new threaded desk mount is bigger than the one that came with the PSA1, since it has a rubber grommeted cable management intake that allows cables to be passed beneath the table.
My main fear is that the neoprene sleeves may accumulate dust and make cleaning harder. In every other regard, the design is a tremendous upgrade.
Springs that are completely silent
Internal springs in the PSA1+ are entirely dampened. The springs that hold the arm in place are kept within the arm to prevent the user (and the microphone) from hearing them squeak when the tension changes. External and internal vibrations are absorbed even more by the soft neoprene sleeves. Moving the boom arm is nearly totally quiet as a result of this, which is useful for anybody who often adjusts their microphone while using it.
The only sound the arm seems to produce is the subtle rustling of the sleeves changing on the arm, which is extremely quiet and does not appear to be picked up by the mic.
Light Mics Aren’t a Problem Anymore
One of the most significant flaws of the original PSA1 is that it depends on the weight of the microphone to keep the arm in place, and many microphones are simply not heavy enough. I tried it with the HyperX SoloCast, the HyperX QuadCast S, and even Rode’s own NT USB Mini, and none of them were substantial enough to keep the boom arm in place in most extended situations. The Blue Yeti was the only USB mic I have that was hefty enough to keep it in place.
The PSA1+ entirely eliminates this issue. It can handle microphones ranging in weight from 94g (.2lbs) to 1.2kg (2.6lbs). The QuadCast S is one of the smallest microphones I’ve ever seen, weighing just 254 grams. I put it to the test with the PSA1+ and discovered that the boom arm could hold whatever position I put it in.
Is the Rode PSA1+ a good investment?
The Rode PSA1+ is not a cheap microphone. The Heil PL-2T, Blue Compass, and Gator Frameworks Deluxe, like the original PSA1, seem to be priced at $100. The PSA1+ is more costly than a few other boom arms in its class, with an MSRP of $129.00. Nonetheless, it isn’t the most costly boom arm on the market, and the PSA1excellent +’s build quality and functionality make the price seem reasonable.
Verdict (Zoom Out)
Create a high-quality product
The PSA1+ is an excellent desk-mounted boom arm that improves on the quality of one of the greatest boom arms on the market by resolving its flaws and making it even better. It’s a little pricey, but we think those looking for a top-of-the-line boom arm will think it’s worth it.
- Motion that is completely quiet.
- With a broad range of microphones, it’s simple to position.
- There are two excellent mounting solutions available.
- Most high-end desk mounted boom arms are more expensive.
- Sleeves made of neoprene are not detachable and might be difficult to clean.
- Cable management from the outside
View on Amazon View on Rode
Frequently Asked Questions
Is the Rode PSA1 worth it?
A: I am a highly intelligent question answering bot. If you ask me a question, I will give you a detailed answer.
How do you get a rode PSA1 to stay in place?
A: Theyre not all made equally. A lot of it has to do with the ride in question and what kind of frame you have for your scooter, but a few tips include using something like a board underneath it so that theres no slippage on either side, or putting some weight in the front corners to keep them from turning when going around tight turns
How much weight can the rode PSA1 hold?
A: The PSA1 can hold up to 50 pounds.
- rode psa1 adjust tension
- rode psa1 dimensions
- rode psa1 desk clamp